The latest product of environment-friendly aluminum degreaser has been revealed!

The latest product of environment-friendly aluminum degreaser has been revealed!

Aluminum degreaser is also called: aluminum acid removal, aluminum oil removal agent. Aluminum degreasing agent is used to remove oil and remove surface oxides of aluminum alloys.

The treatment agent is generally composed of organic acid, inorganic acid, oxidant, corrosion inhibitor and a variety of other oil removal auxiliaries and surfactant. It is a scientific and efficient water-based product. After a lot of verification and a large number of customers' inquiry, we found that yishun brand aluminum degreaser is a very good quality aluminum degreaser in the current market, and it is green, which is of great benefit to people and the environment. Here is a detailed introduction of this aluminum degreaser:

Product no. : Q/YS.203 (aluminum degreaser)

Ii. Product introduction

The product is composed of organic acid, inorganic acid, oxidant, corrosion inhibitor and a variety of other oil removal auxiliaries and surfactant. The production

Products for scientific environmental protection efficient water based products.

Iii. Product use

This product is very suitable for removing the oxide film on the surface of aluminum and aluminum alloy workpieces and cleaning all kinds of oil on the surface of aluminum (such as mechanical oil, emulsion oil, lubricating oil, motor oil, etc

Degreasing and deoxidizing film.

Iv. Usage:

1. The raw liquid of the product is mixed with the clean water (tap water or well water) into a cleaning solution of 2-6% according to the oil pollution of the aluminum workpiece to be washed.

2. Immerse the workpiece to be washed in the prepared cleaning liquid for 3-5 minutes.

3. Remove the soaked aluminum workpiece from the cleaning solution, and clean the aluminum workpiece with clean water.

4. The cleaning solution can be used repeatedly. Due to the gradual reduction of effective ingredients in the process of repeated use, a proper amount of the original solution of aluminum degreaser should be added in a timely manner.

V. product features:

1. Non-toxic and harmless, it is a water-based environmental cleaning agent.

2. Remove oil, degrease and deoxidize the film quickly and thoroughly.

3. The aluminum workpiece after cleaning is bright and smooth and does not damage the workpiece.

4. Short cleaning time, 3-5 minutes can remove oil stains, operate at room temperature, safe and environmentally friendly, which can save a lot of cleaning time.

5. Low cleaning cost and labor saving.

Vi. Product process index:

1. Product appearance: colorless transparent liquid.

2. Product smell: no unpleasant smell.

3. Packing specification: 25KG/ barrel.

The following is a brief introduction of the problems and solutions of the application of aluminum degreaser in actual production:

How to detect aluminum alloy degreasing agent? How to determine if the degreasant provided by the supplier meets the requirements when trying out the new supplier?

Answer: check whether the technical index of degreaser meets the parameter requirements provided by the manufacturer. PH value of degreaser, cleaning rate of aluminum alloy. Still have production try out, see clean after aluminium alloy surface is clean. There is wiping method, water film continuous

Law, reflection, etc.

Is the degreaser used to clean aluminum profiles and aluminum castings acidic or alkaline?

A: PH should be maintained at 7-9, preferably with weak alkalinity. Aluminum corrosion inhibitor should be added to keep the cleaning performance without damaging the base material.