New type aluminum plastic separating agent(chemical separation,New type separation liquid,Aluminum plastic spacer fluid,Chemical separation liquid ,Aluminum plastic separation agent/Separation agent for aluminum plastic sheetate liquid

New type aluminum plastic separating agent(chemical separation,New type separation liquid,Aluminum plastic spacer fluid,Chemical separation liquid ,Aluminum plastic separation agent/Separation agent for aluminum plastic sheetate liquid

First, the product code: Q / YS.711 (Yi Shun brand)

Second, product advantages:

This product is independently developed by Yi shun Chemical a new type of aluminum-plastic separation agent, with the time-saving and labor-saving, rapid separation, less consumption, the advantages of low separation costs, the agent durable. Non-toxic nature. Reach the international top level, is the upstart in the aluminum-plastic separation industry. Can be widely used in the complete separation of aluminum-plastic composite, after separation, aluminum and plastics are thoroughly separated by this chemical, aluminum and plastic recovery rate is almost 100%.

Third, product index:

1, The product is a transparent liquid, a slight fragrance, almost colorless or light yellow.

2, The proportion of products> 0.9

3, The product PH value <5.0

Fourth, the use of methods:

This product can be used glass containers, PE plastic containers, ceramic containers, not iron material, operation with PE gloves. This product stock solution to use. The aluminum plastic material cut into 2 to 3 cm wide, is conducive to shortening the time aluminum-plastic separation.

The aluminum-plastic material soaked in a new aluminum-plastic separation agent, half-way flip aluminum material, soak 2-3 hours at room temperature, the aluminum-plastic completely separated, remove the aluminum and plastic. Dry to make potion return to work pool. Re-wash plastic and aluminum.

Soaking process, do not add water to enter, soak and storage of syrup in the process, the soaking tank cover.

Fifth, note:

1, The product is corrosive, not with the skin and eye contact. In case of accidental contact, wash immediately with plenty of water.

2, The use of this product stock solution, can not be heated, room temperature use.

3, Plastic separation time and the width of aluminum plastic material (broken), cutting into 1 ~ 2cm wide, soaking time is 1 to 2 hours.

4, Soaking process, if the mechanical stirring, the separation time can be greatly reduced.

5, Aluminum-plastic separation time is also related to the climate, soaking time should be extended at low temperatures.

6, The operation, to be covered, to avoid unnecessary evaporation.

Other processing：Multifunctional disinfection detergent、Ink Cleaning Agent、Gold and silver jewelry bright cleaning agent、Metal cleaning agent、Environmental degreer and rust remover、Stainless Steel Polishing Agentas、Coating type soft glue removal cream