Copper Matte Agent,Copper Soft light treatment agent,Copper Sand surface Agent,Copper matting agent

Copper Matte Agent,Copper Soft light treatment agent,Copper Sand surface Agent,Copper matting agent

First, the product code: Q / YS.117 -3 (Yi Shun brand)

Second, the scope of products:

This product is widely used for copper surface matte (pearl, satin) surface pretreatment. The matt surface of the copper surface, the shape of a comfortable visual surface, the formation of elegant soft, the product environmental protection.

Third, product index:

① sauce red liquid.

② proportion:> 1.0

③ PH value: acidic

Fourth, the use of methods:

① copper degreasing, wear latex gloves when operating. This product is fully shake evenly, then heated to 60 ℃ ~ 80 ℃.

② immersed copper workpiece in the product for about 30 seconds to 2 minutes, remove the workpiece, rinse with water, you can get soft light (pearl) effect.

③ drying the workpiece.

Fifth, note:

① pre-treatment to ensure that the workpiece without oil, fingerprint-free.

② do not bring water into the soft processing agent.

③ processing temperature is room temperature (60 ℃ ~ 80 ℃), time is 30 seconds to 2 minutes.

④ the medicine to use plastic containers dress.

⑤ processing to gently flip the workpiece, do not overlap.

⑥ during use, there is consumption of syrup, per kilogram of matte agent to be added to 10 ml of hydrogen peroxide, slowly added, rapid stirring, restore the efficacy of matte agent.

Other processing：Environmental degreer and rust remover、Stainless Steel Polishing Agentas、Brass Green Chemical polishing Agent、Electroless plating of real gold on copper surface、Strong oil stain removal agent、Environmental non-cyanide gold removal liquid、Brass Green Chemical polishing Agent