Zinc polishing agent,Chemical polishing agent,Chemical polishing agent for zinc alloy,Zinc brightener

Zinc polishing agent,Chemical polishing agent,Chemical polishing agent for zinc alloy,Zinc brightener

First,Product number :Q/YS.506(Yi Shun brand).

Second, scope of application：

This product is widely used in a variety of surface polishing of zinc alloy die casting, , aluminum alloy surface after immersion can reach the light mirror effect.

Simple operation ，use at the room temperature，only need to immerse . Suitable for all kinds of zinc alloy treatment before plating and light treatment

Third,  Product index:

1.Transparent colorless liquid，no heavy metal.

2.Specification gravity：﹥1.2

3.Acid products, a slight odor

Fourth,  method of use：

The products use solution without water

1.Zinc alloy descaling ,oil elimination

2.Zinc alloy polishing：flip and take out the workpiece timely after the clean zinc alloy is immersed in zinc alloy chemical polishing solution about 30-60 seconds. Then put it in the water and rinse it.

3.Drying zinc alloy workpiece

Fifth,  matters need attention

1.The products use solution without water

2.Adding additive 2%-4% in the course of treatment

3.Wear latex gloves in operation because of the corrosive products

4.Aluminum workpiece removed from the polishing solution need to immediately wash, spend too much time on it will affect the gloss.

Other processing：Steel imitation gold liquid、Environmental degreer and rust remover、Brass Green Chemical polishing Agent、Electroless plating of real gold on copper surface、Strong oil stain removal agent、Copper、chromium and nickel stripping agent