Oil and Rust Removal Agent for Copper-Iron Components, Environmental Acidic Oil Removal Agent, Scale Removal Agent for Copper-Iron Components, Oil and Oil Removal Cleaner, Metal Oil and Rust Removal Agent, Surface Oxidation Cleaner, Metal Cleaner ,Maintenance Agent for Mechanical Equipment

Oil and Rust Removal Agent for Copper-Iron Components, Environmental Acidic Oil Removal Agent, Scale Removal Agent for Copper-Iron Components

I. product number: Q/YS.301-1 (yishun brand)

II. Product introduction

Our company is production of rust removing by a variety of scale removal, cleaning agent, penetrating agent, surfactant, etc, made from the basic non-corrosive steel, iron, copper and other products, not burning, not dry, do not contain heavy metal and nitrite class controlled substances, cleaning, descaling, degreasing of one function, can effectively improve the cleaning speed, only 2 to 20 minutes can completely remove rust and oil pollution, reduce the trouble of cleaning, protection, many times is necessary to protect mechanical equipment and metal products surface treatment products. Very suitable for repair, manufacture, cleaning, spraying, electrophoresis, electroplating and other industries.

III. Product features: light yellow transparent liquid.

IV. Application: 

repair, manufacture, cleaning, spraying, electrophoresis, electroplating, special effect on copper and iron parts.

V. usage:

1. Dip cleaning method: dilute the rust remover into 1 to 3 times, and then immerse the object to be removed in the diluted cleaning solution. After the rust and oil are cleaned, remove the object and rinse it thoroughly with clean water before proceeding to the next procedure.

2. Wiping method: apply the rust remover to the surface to be removed with a brush, every few minutes. If water sandpaper or rough wipes are covered with the rust remover, the cleaning effect will be faster and more obvious.

3. the processing time: 2 minutes - 20 minutes, at 20 to 50 ° C temperature conditions

VI. Matters needing attention

1. The rust remover is acidic and irritating to human skin and mucous membrane. Please pay attention to avoid contact with skin and eyes.

2. Please wear latex gloves when operating. If the gloves get into the skin or eyes, please wash them with clean water immediately.

3. the use of the product should be plastic container device, not a long time with the cement floor, floor tiles, ceramic tiles in contact, such as contact immediately with clean water.

4. work cleaning solution work for a period of time, will consume the effective ingredients, should supplement a certain rust remover solution, or when found in the cleaning solution impurities color is too deep cleaning effect is not good, should be replaced with a new rust solution.

5. Copper and iron parts after rust removal shall be immediately processed in the next step. Such as anti-rust treatment.

Other processing：Chemical nickel plating liquid、Copper rust remover and degreasing agent、High efficiency deplating agent、Metal polishing Agent、Stainless steel chemical thicker liquid copper  plating